01304 827609 info@use-ip.co.uk Find us

Recent content by 3xposureofficial

  1. 3xposureofficial

    Guess what, a new cable run as annoying as it was worked haha! Just bizarre

    Guess what, a new cable run as annoying as it was worked haha! Just bizarre
  2. 3xposureofficial

    I understand however I have all the correct tools and have crimped many a RJ45 and patch panel...

    I understand however I have all the correct tools and have crimped many a RJ45 and patch panel. The cables are clearly fine if they are transmitting data and power, as an example, one at the in laws has been working for some time but disconnected at 2 in the morning and has not come back on
  3. 3xposureofficial

    Right here's one for you, before I go to replace my cable, I thought I would try every last...

    Right here's one for you, before I go to replace my cable, I thought I would try every last measure. Re crimped and unplugged a number of times. Now I have the same issue as my in laws. I can tell the cable is not damaged, as it just out of no where decided to make itself live! now it drops...
  4. 3xposureofficial

    Yeah okay, sounds about right. If it was an easy cable swap out I would have done that already...

    Yeah okay, sounds about right. If it was an easy cable swap out I would have done that already and was trying to avoid it but I think you are right. One other question. I installed a family members CCTV (Hikvision) but intermittently the cameras drop out, sometimes for a minute and other times...
  5. 3xposureofficial

    I will give this a go but I did try another camera I had laying around and that too failed to...

    I will give this a go but I did try another camera I had laying around and that too failed to connect. It all leads me to believe the cable is at fault but when its tested and working okay I just am not sure at all, especially when I first plugged in the camera and it was actually working on...
  6. 3xposureofficial

    Hi Dan, thanks for coming back. Same cable, when tested on a basic cable tester, all strands are...

    Hi Dan, thanks for coming back. Same cable, when tested on a basic cable tester, all strands are connected and pass test. Run is 10 meters. 2 other cameras are working no issue. NVR is DS-7604NI-K1-4P(B) and the cameras are DS-2CD2145FWD-I I am inclined to run a new cable, but it will be...
  7. 3xposureofficial

    Just installed a new hikvision kit. one camera fails. I plugged direct into the DVR and no...

    Just installed a new hikvision kit. one camera fails. I plugged direct into the DVR and no issues, I then tested the cable to the patch panel, no issues. Plugged in again on its arm and it came up but then a few minutes later it went down. I can’t seem to get it up any more and just says no...
  8. 3xposureofficial

    I have recently installed a new HDD as I expanded from 2 to 3 cams. I have noticed when checking...

    I have recently installed a new HDD as I expanded from 2 to 3 cams. I have noticed when checking some playback (Seems to be when there is more movement) but the video either seems to jump a fair few seconds missing footage, or recently I just checked one piece of footage & it jumped back 3 - 4...
  9. 3xposureofficial

    H264+ Causing Freezing with Hikvision setup

    Sounds about right then, thanks so much for your help on that one. Good to know you experienced that same issue and its not just me. I will leave it how it is and see how we go. may be that when i expand to more cameras this weekend I have to get a larger HDD or compromise on how far we keep...
  10. 3xposureofficial

    H264+ Causing Freezing with Hikvision setup

    Both cams are DS-2CD2142FWD-I and are the only two connected (I have switched 264+ off while this problem persisits)
  11. 3xposureofficial

    H264+ Causing Freezing with Hikvision setup

    I just performed the upgrade, and whilst it does allow me to switch the camera to H.264+ now with working playback, the image keeps flashing (as it adapts to the scene it seems)
  12. 3xposureofficial

    H264+ Causing Freezing with Hikvision setup

    DS-7604NI-E1/4P NVR with 2 x DS-2CD2142FWD-I Cameras NVR firmware to V3.4.98 on my E Series, And also upgraded the cameras to V5.5.82 Recording directly onto the NVR
  13. 3xposureofficial

    H264+ Causing Freezing with Hikvision setup

    I recently switched to H264+ encoding on my hikvision setup with 2 cameras, however one of them freezes and is apparent on the recorded video too. Once I switch back to H264 everything works as normal. Is there something i am missing as one of the camera works flawlessly.
  14. 3xposureofficial

    Thanks that makes sense, although the annoying thing is you cant have it on auto switch with...

    Thanks that makes sense, although the annoying thing is you cant have it on auto switch with custom day/night settings? (Basically I want to auto switch because of day light saving and the likes)
  15. 3xposureofficial

    Hi Dan, I dont suppose you could tell me if there is a way to set day and night profiles...

    Hi Dan, I dont suppose you could tell me if there is a way to set day and night profiles separately on the hikvision cameras?
Back
Top