Recent content by ad337

I am pleased to experience that corrosion in plugs is the cause of failure. I have some doubts about the software, but I find the performance of those Hikvision cameras very satisfactory and I also hope for a long life.

Maybe I have some good advice for you that is also widely used by radio amateurs and satellite dish users: Banding plugs with tape is not the solution, as long as air gets to the contacts there is also condensation and corrosion. I always fill plug spaces completely with acid-free Vaseline...

Indeed, straight from the cameras. I am not using an NVR, but have the images stored on the (micro) SD card in the camera.

Solved! Port 554 appears to be the solution for me. To be on the safe side: I made the settings using the iVMS-4200 program. From there: edit indoor station >> remote configuration >> Intercom >> IP camera data. And then fill in: Name, IP address, port number (554), username, password and HIK...

Dear forum members, I am curious if I am the only one running into this problem: In order for a doorbell camera to function properly, it is recommended to purchase an indoor monitor. The indoor monitor became the DS-KH6320-WTE1. I connected doorbell camera DS-KV6113-WPE1 to it. This combination...

Thank you for your response. I have absolutely nothing to make 24/7 recordings. My network would be constantly loaded and I wouldn't have the ability to quickly recognize activity. I don't really feel cheated but am baffled by the carelessness with which this product has been marketed. I do...

Dear forum members, I also bought the DS-KV6113. Earlier I bought some bullet cameras of the type ds-kv2085G1-i and became so enthusiastic about the many possibilities that it was decided to stay with that brand. My wishes were/are: wired network, power supply 12 Volt, motion detection with...