Recent content by bien gomez

Hi Phil. I forgot to ask, is there a link or some sort of a chart for HIKVsion products for IPCam/NVR/DVR that shows which model supports a certain feature (line crossing, object removal, etc). Sorry for the trouble. Thanks.

Hi Phil. Thank you for sharing these links. Really appreciate the inputs.

Hi I was wondering if somebody here has encountered a large scale installation of HIKvision on a building or a factory? Normally IPCamera's are connected to the NVR's POE port but on some occassions, we need to make use of a PoE switch if the IPCameras are farther or are needed to be...

Thanks Kieran

Hi Kieran thanks.

Hi I would like to ask the HIKVision users that remotely access their NVR/IPCam via EzViz. Assuming the NVR / IPCam is connected on an internet subscription with a public IP, which do you think will have a faster remote viewing experience? (Faster in the sense that the video streaming and the...

Hi Mark. Try resetting both NVR and IPCam back to their factory settings. For IPCam, press and hold reset button while you power up the IPCam. Wait for about 20 seconds before releasing the reset button. For NVR, choose "restore to factory settings". Configure NVR first (password, network...

Hi Try using other browsers such as Opera and/or Firefox. I use firefox to view the local view if I am away from the NVR. Hope this helps.

Hi Kieran. I dunno what happened but it worked. I think maybe there are some things that we missed out during the installation/setup. Not we are able to confirm that starting on the 17th IPCam, it should be configured on the same LAN the NVR is connected to so both NVR and IPCam from the 17th to...

Hi Kieran. Sorry I did not specify. It is an outdoor access point with a passive POE port. This will give power to the IPCam so no need to layout a separate power source for the IPCamera. The link is @ http://www.tp-link.com/en/products/details/cat-37_CPE210.html We tried but the IPCam does...

Hi I wanted to ask you guys if you have tried using an outdoor CPE with a 24v passive POE LAN port. It needs an IPCam that supports a 24 passive POE. The main objective is to connect the IPCam directly to the passive POE passthrough LAN cable of the CPE in order to power and link it on the...

Hi Kieran. I will keep that in mind. Thanks.

Yikes. How is HIK support? They reply with accurate solutions or reply? In our experience they reply but they do not tell you the specifics. You have to ask them again what they mean or ask them to be more specific. By the way, this might be off topic from my post but have u tried using a...

Hi Kieran. I just wanted to make sure. If incoming bandwidth is @ 25 Mbps for a 4-port NVR, this means as long as the total of my IPCam will not exceed the 24 Mbps, this is ok. Please confirm, Thanks.

Hi I think there is no firewall installed. The connection is as follows: ADSL modem --> LAN port of NVR. Basically that is it. =(