Recent content by Davesims

Hi Dan have you heard if we are any closer to being able to capture higher-res snapshots on the Hikvision as yet?

Hi all, i am sorry for the newbie question but is IPC on the first 2 new features for specific cameras, I suppose I am asking What is IPC?

Thanks, heaps man, its functionality I would definably use and i didn't really want to move over to Dahua

Hey Kyle, that would be fantastic I would have though the Hikvision would be more powerful than the Dahua 5216 which this feature is available but not sure the Dahua would be as reliable Alternatively ,i suppose they could save to my Synology NAS? But would not be able to view em on the NVR...

Further to the above the snapshots i am talking which can be set to take when an event occurs, the setting for this is under the capture section of storage management on the NVR which will only allow the pics to be captured at a max 704x 480 but if you look at the same setting son the camera it...

Hi Kyle thank you for the response. i am referring to the snapshots that you can have taken upon an event , setup in the storage management area on the NVR

Hi, all, i am sorry to bother you guys but i was wondering if you could help with a question. I have Hikvision 7608NI-I2-8P Nvr along with a couple of 2385''s and 2355's, I am interested in having snapshots taken of evens and being stored on the NVR like i could do with my Dahua when i had it...

Thank you for your response. So I have it straight, The recording schedule on the NVR is set for continuous for that camera but you also and enable and set the motion detection, line crossing or intrusion detection on the NVR to flag those evens? So pretty much nothing is done on the camera...

Hi all, I am trying to figure out how to set up a couple of things on the 7608 and it's doing my head in and was hoping someone could help with a little advice. I will discuss it with the one camera as it should apply to the others once I have replaced them. I have the 2CD2542FWD-IS set up and...

Hi thank you for the response, i will grab some over the weekend

Hi all I have the 2CD2542FWD-IS as one of my cameras and have found the video quality to be fairly grainy, is this the norm for this camera?

Hi Kyle, I am assuming you mean setting the NVR to Motion recording, I assumed that setting the NVR recording to motion was for if you are using the NVR’s motion detection , where I want to use the cameras motion detection to prompt the NVR to record, I will try this thank you

Hi all I have the Hikvision DS-7612NI-E2 NVR and a couple of the Dahua 4831-EMP-ASE cameras, i am trying to use the motion detection setting on the camera and have it record on the Hikvision NVR, the detection works on the camera but the NVR is not recording anything. If the NVR was set to...