I came across a Youtube "review" of the DS-2CD2347G1-L(U) by some Oz Security guys from Perth in which they claim you can use line crossing smart events to trigger the LED light. (they don't show any configs, but footage that shows the line crossing event and the light coming on.
New version has appeared here V4.40.016
Release notes list three fixes.
1.Fix the problem of insufficient NVR power supply caused by high-power camera access.
2.Fix the problem that the NVR motherboard has a small probability that some slots cannot recognize the hard disk.
3. Fixed the problem...
The worry about damaging original parts went out the window while cutting the cables off the psu :-)
You a right on the noise, without the low noise adaptor the nocuta was still outside (my) tolerable noise level for where it is installed.
But those considering less invasive...
in some posts it was mentioned that the Hikvision Colorvu Cameras cannot turn on the LED light based on smart events.
Is there any other camera that can do that? To light up the scene to capture more details once motion is detected.
I would have thought having camera with built in light...
Hi. I finally jumped and added the external power brinks to my 7608NI-I2-8P.
Using Noctua NF-A4x10 PWM (40mm) to replace the case fan and a Noctua NF-A8 ULN, (80mm) as a new addional fan to bring air in.
No fancy video, but similar to mozso using Dremel to cut hole into bottom and using a fan...
same boat only i got mine last week..
my first impression is the main noise culpit is the case fan on the side.. most noise is coming from air airflow and not the fan itself.
Planning on replacing both fans with noctu and see.
If there was single power brick to be found I'd probably go with...
A difference you might want to keep in mind, the 4 channel K1is fanless.
The K2 and the L2 both have two fans and are pretty noisy .
Depending on your planned location and noise sensitivity this might be consideration. (something i did factor in..)
In the V4.22.005_191208 is a new sub folder named "line crossing issue on web browser fixed version"
inside is new build from last week V4.22.005_200327. (file size increased by few MB)
just recived my nvr and cams and was routing for the latest updates (as you do..)
Thanks a lot Dan..
no need for events recording.
actually there is the 2045 as well , which is 4MP darkfighter cam (Easy IP 3.0 ) but I presume there is no real reason to use that over the 2065 (other than price).
I've also looked at the Mini Dome..
I'm looking for couple of cameras for front and back of 2 storey house.
Its for overlooking 7m*6m front garden/drive and 7m*15m back garden.
I can't mount camera onto exterior walls , and only have about 7cm wide soffit to mount the cameras.
I found a few mini-bullets that have a mounting...