Recent content by Frankf

Hi Kyle Thank you very much for that, I’ll keep you updated as soon as I fit the new cams. Here’s a quote from one of said posters: connect the cameras to the POE switch and connect the POE switch to the back of the NVR. Never run the camera traffic through the router.

Hi Kyle, Many thanks for that, I did wonder about connecting direct but some posters were suggesting just that, saying that camera traffic should never go through the router etc, so thought I’d double check. Thanks again for the advice.

Hi, Ive now changed the test camera's IP address, subnet & gateway etc via the SADP tool and its now working fine! its still connected to the POE switch and the switch is connected to the router as original set up. I just need to replace all four cams now, which are clearly U/S as they cant be...

Hi Kyle, nvr is Hikvision DS-7604NI-E1-4P/A Camera; Hikvision IPC B220 (bought as a test camera) the PC is connected via wifi to the LAN Ive attached a diagram of my set up - its exactly as shown but mine has just 4 cams obviously. the poe switch is a Hikvision model. I'll post images of nvr...

Hi, been running a Hikvision nvr for 3 years, 4 Poe cams connected to a hik Poe switch connected to router, which is connected to nvr. All was ok but it now appears all 4 cams have failed, Sadp tool cannot detect them even when they are connected direct to pc lan. Bought a new hik Poe cam to...