01304 827609 info@use-ip.co.uk Find us

Recent content by Heuer

  1. H

    Unable to configure 2632F after f/w upgrade

    Thought I would follow up on this as it may benefit others. My DS-2CD2632F (UK version) became semi-bricked when I updated from V5.2 to V5.4.5. Video would display but I could not make any changes to the configuration including the IP address. I gave up trying to fix it and bought a...
  2. H

    Happy to give the compiled version a go if you give me the link.

    Happy to give the compiled version a go if you give me the link.
  3. H

    Comes back with 'Failed to reset password. Device Denied'. About the only thing I can do is...

    Comes back with 'Failed to reset password. Device Denied'. About the only thing I can do is reset the date/time via iVMS4200 and that comes back with an error message but the change takes place until a reset. I think the camera is totally bricked.
  4. H

    Magic number and Language correct for 4.5.0 digicap. Password reset tool returns error - "unable...

    Magic number and Language correct for 4.5.0 digicap. Password reset tool returns error - "unable to connect to server".
  5. H

    Unable to configure 2632F after f/w upgrade

    Willing to try anything and I can easily load 5.4.0 PM sent
  6. H

    Hi Stewart I can load 5.4.0 so happy to try your suggestion using SADP. What do I need to do...

    Hi Stewart I can load 5.4.0 so happy to try your suggestion using SADP. What do I need to do? Thanks David
  7. H

    Unable to configure 2632F after f/w upgrade

    Thanks for the suggestion but when I try it comes up with 'configuration failed' message. Also can't change the IP address from within the BCT.
  8. H

    Unable to configure 2632F after f/w upgrade

    Looks like my account has been hacked by 'engynia peter' or at least someone has changed my username.
  9. H

    Unable to configure 2632F after f/w upgrade

    No - the IP address is unique besides which ESET security immediately picks up attempted duplicate IP's and the superb Ubiquiti Unifi Security Gateway provides both intrusion protection and full LAN metrics. The USG dashboard would have lit up and ESET would have nagged me every 10 seconds. It...
  10. H

    Unable to configure 2632F after f/w upgrade

    Yes, tried push button reset several times. Actually I have now managed to change the IP address to my preferred one via iVMS but now I cannot open the Config screen as I am getting error message "HCNETSDK.DLL {7} Connecting to Device failed. The device is offline or the network timed out". Ping...
  11. H

    Unable to configure 2632F after f/w upgrade

    pyrotenax - Tried connecting PC direct to camera and using SADP which actually did allow me to change the IP address and activate the camera. When I went into iVMS though it went back to .64 and changes will not accept. Phil - push button is different to other cameras as it stands proud and is...
  12. H

    Unable to configure 2632F after f/w upgrade

    Following advice from Use-IP I decided to upgrade three of my cameras from V5.2.X to V5.4.41 using iVMS. First two cameras (2132 & 2332) upgraded perfectly and the third upgrade seemed to go well. However I noticed that whilst the other two cameras retained their IP address and other settings...
  13. H

    Firmware How do I update HikVision Firmware in just nine simple steps? - updated 20th February 2019

    Thanks Phil. I will start a new thread. David
  14. H

    Firmware How do I update HikVision Firmware in just nine simple steps? - updated 20th February 2019

    Downgraded to 5.4.0 but no improvement. Tried to downgrade to 5.3 but it would not allow it so I assume the camera is almost useless as Milestone no longer recognises it even at the new IP address as it says "incorrect password" presumably because it is refusing incoming connections. New camera...
  15. H

    Firmware How do I update HikVision Firmware in just nine simple steps? - updated 20th February 2019

    In the first post Phil says he has never encountered a problem in skipping updates and that indeed was my experience with two of my cameras which went from 5.2.1 direct to 5.4.4. Also there are no links to the earlier f/w as far as I can see. I have found 5.2.8 on another Forum. Can I downgrade...
Top