Recent content by KamirZG

You can add camera's to another NVR via rtsp?

In previous FW you could choose between indoor station and center. 1gen units had option to do it both ( one press call indoor, longer press call center). You should give it a try, i'm not sure.

Has it worked for you?

Try this. I haven't played with SIP option's. Maybe somebody else would be of better help.

I knew where it was in older FW ( like 2.0.8 ). I'll look into it and post it here later.

And you need configure that under outdoor unit.

Hi, Under Intercom->Dial you have call notification center. This option enables calls to IVMS4200. Master station is something other.

It doesn't matter, KAD706 is just like regular network switch. You congifure what outdoor calls which indoor using and programming IP adress. On every indoor unit under " (Main) Door station IP address" you enter IP address of outdoor unit you want to receive call from. Only important thing...

You need KAD706. KAD706-S you need to use only if there is need for 15 or more KAD706. Every outdoor calls every indoor?

Hi Tony, don't know who sold this configuration to you but you can only connect two outdoor unit's to KAD706. First must be connected to ch6, and second can't have more that two submodules. Even the second outdoor is not recomended. Three outdoor station won't work. You'll need one more...

https://www.hikvision.com/content/dam/hikvision/en/support/faq/How-to-solve-Hik-Connect-offline-issue.pdf Here is some steps.

What's your DNS? Use Google's 8.8.8.8. Try it with DHCP on, maybe you have problems with IP address. Change port on your router( where DVR is connected). dev.eu.hik-connect.com litedev.eu.hik-connect.com This is two of their servers, try with them.

Hi Kyle, thanks for response. One client is claiming that Hik have some option to enable that but i never heard about that, so I had to ask here while i wait for an answer from HIK support.

Hi, I have a situation where i record stream from camera to NVR. Camera has SD card in her self. When there is a lost comunication between cam and NVR, camera records on her self. How can I set to transfer that part of playback when there was no connection between cam and NVR to NVR HDD? I...

Check voltage of you power adapter, maybe it's just adapter.