01304 827609 info@use-ip.co.uk Find us

Recent content by malford

  1. malford

    ANPR not saving images to NVR

    I’m running the components below and have no problems with the ANPR DS-7608NI-I2 / 8P with firmware V4.40.016 build 200803 DS-2CD4A26FWD-IZS/P with firmware V5.4.7 build 180309
  2. malford

    iVMS is definitely faster using the ASUS DNS service. I did have to change the port 8000 as I...

    iVMS is definitely faster using the ASUS DNS service. I did have to change the port 8000 as I was getting Attempted illegal logins from multiple IPs every second
  3. malford

    Sorry for the late reply I was on vacation and didnt see this. Im now running a Asus RT-AX88U...

    Sorry for the late reply I was on vacation and didnt see this. Im now running a Asus RT-AX88U and use both iVMS for the 2 neighbourhood watch shared cameras and Hikconnect for my 8 IP cameras. I have "Enable DDNS" switched off & "Enable uPNP" switched off on the NVR network settings.
  4. malford

    Firmware Latest HikVision Firmware for I-Series NVRs - V4.40.015 build200616

    Thanks for the tip but we should not have to do this for incremental updates... I rolled it back to the previous version in the end and lost all my account settings and had to reconfigure from a fresh install. I thought Hikvision had sorted out the firmware updates, in future I'll let someone...
  5. malford

    Yes the ASUS DNS service using iVMS was much faster than Hik-Connect

    Yes the ASUS DNS service using iVMS was much faster than Hik-Connect
  6. malford

    Firmware Latest HikVision Firmware for I-Series NVRs - V4.40.015 build200616

    Upgraded to V4.40.015 build200616 firmware last week and all went without any hitches and has been working fine. Yesterday I decided to do a manual restart via the NVR GUI and now I’m getting “Not Enough Network Bandwidth“ error message and lost one of my IP cameras :( if I restart again the...
  7. malford

    Firmware Latest HikVision Firmware for I-Series NVRs - V4.40.010 build200430

    Thanks fin, I'll wait until they fix the ANPR issue before hitting the upgrade button.
  8. malford

    Hik-Connect Hikvision NVR using Hik-Connect - alarming for "illegal login" attempts

    Hello Phil. NVR DS-7608NI-I2 / 8P Firmware V4.22.005 build 191208 All IP cameras running the latest firmware (checked last night) Looking at the NVR log from last night I had the following IP 176.215.108.92 from The Russian Federation trying for 3 hours to gain access. WEB Hikvision IP...
  9. malford

    Hik-Connect Hikvision NVR using Hik-Connect - alarming for "illegal login" attempts

    Ok so to clarify go into NVR and change server port to “123456” (or similar) then go into router and add this “123456” port to port forwarding then reboot both NVR and router ?
  10. malford

    Hik-Connect Hikvision NVR using Hik-Connect - alarming for "illegal login" attempts

    Sorry to bump an old post but Im am getting increasingly concerned about the Hacking attempts on my Hikvision NVR. This time last month in a 7 day day period I was getting 4-6 illegal login attempts... Since the lockdown, In the past 2 days I have had 675 illegal login attempts showing on the...
  11. malford

    Network Unreachable Hikvision

    Thanks Kyle & Stewart... I did the installers course 3 years ago and a bit rusty... :) It was previously my own kit that I sold locally on marketplace 3 years ago and ended up offering to help configuring it for him and ended up spending 2 days installing the whole system including hdmi feeds...
  12. malford

    Network Unreachable Hikvision

    I Carried out a full NVR reset via GUI :)
  13. malford

    Network Unreachable Hikvision

    Thanks for your reply. I didn't think it was possible to interrogate the IP cameras with SDAP without plugging directly into the NVR port? If I try SDAP using WiFi or via the router port all I get is the NVR. Im now convinced its the camera passwords that are wrong as the owner has admitted he...
  14. malford

    Network Unreachable Hikvision

    Hello guys need help on the following error? “Network unreachable“ DS-7608NI-E2/8P with DS-2CD2T42W-I8 and DS-2CD254FWD No live view on NVR GUI and all cameras showing yellow warning triangle “Network Unreachable“ when I click on icon. I have tried manual camera connection inputting password...
  15. malford

    Hik-Connect How do I get my iPhone to remember my Hik-Connect login details??

    Go into settings and turn on “save device parameters” that should work...
Top