01304 827609 info@use-ip.co.uk Find us

Recent content by Mick Dixon

  1. M

    Question on CCTV Monitors

    I'm using a Benq monitor downstairs and an LG upstairs and i also use an acer for my computer but can monitor on that too(yes i'm greedy) All can be used either for computer or as a cctv monitor
  2. M

    Which cameras and where to install

    Hi We have just replaced our old swann system with Hikvision from Use-ip NVR DS-7608NI-K2-8P It's an 8 channel nvr. we have the choice to expand it, although there is only 2 channels left, you will also need a hard drive for it WD purple is the way to go The 2385 is a suberb camera, we have 4...
  3. M

    Hello from Slovenia

    Hi Robert and welcome to the forum I'm sure your questions will get answered, Good luck
  4. M

    IP CCTV Buyers Guide

    Very good explanation, Seeing this makes it easier for a lot of people looking to get in to a new system
  5. M

    Earning Awareness, Respect and Trust - almost ten years in the making!

    Wise words In all honesty i was about to buy a cctv set-up (hikvision) on ebay, was all ready to push the buy button when my son stopped me, He said dad are you sure those are UK spec, erm not sure was my reply, he turned to me and said i have been doing research/homework on an cctv forum and...
  6. M

    When we ask you for a screenshot ...

    WHAT you mean you have women working at Use-ip, my god what is the world coming too. On a serious note, i have delt with a young lady at Use -ip and she knew more about my system then i did. I don't know why some people feel the need to be rude. Keep up the good work Ladies of use-ip
  7. M

    Rain shade's

    Anyone know if hikvision do rain shades for DS-2CD2385FWD-I and DS-2CD2342WD-I or can use-ip get hold of them? Cheers
  8. M

    Re : How to adjust lighting level sensor on a DS-2CD2742FWD-I dome camera

    No i ran the cable along the side of the cat6, our lofts not high so had to crawl to the lowest point Pass the cable through to the bedroom then out through the wall. Suppose it depends where you run your cable
  9. M

    Re : How to adjust lighting level sensor on a DS-2CD2742FWD-I dome camera

    I already have a 240v power supply in my loft Brian, so all i did was make an extension up then plug the supplied power adaptor that came with the PTZ in,and run the cable along side the Cat cable
  10. M

    Re : How to adjust lighting level sensor on a DS-2CD2742FWD-I dome camera

    New and Old PTZ I just used the power supply that comes with it, there is 240V power in the loft where the Cat6 cables run, so wasn't to hard Only thing i would say if you get one, is buy better anchor bolts ;)
  11. M

    Out with the old, In with the new

    Credit where credit is due Phil Just thinking of sneaking another camera onto the system, without the wife knowing lol ;)
  12. M

    Re : How to adjust lighting level sensor on a DS-2CD2742FWD-I dome camera

    Cheers for the fast reply Phil The PTZ i have from you is DS-2DE4A2201W-DE and we just used the power supply that came with it
  13. M

    Out with the old, In with the new

    First of all would like to thank Phil and all his staff for all their help Finally got the new Hikvision camera system up and running 6 camera's in total inc PTZ, Just a few tweaks here and there. I have been using a Swann system for many years, until my Son put me onto Use-IP and i took the...
  14. M

    Re : How to adjust lighting level sensor on a DS-2CD2742FWD-I dome camera

    HI Phil Powering a PTZ can you use the power supply instead of the POE Injector, I only ask as we have connected the power supply to the PTZ Must admit the PTZ blew my mind when i saw what it could/can do. Brian I turned off all motion and the alarm sign does not come on ?? Thanks
  15. M

    Re : How to adjust lighting level sensor on a DS-2CD2742FWD-I dome camera

    If you turn motion off for all camera's does it still come on?? Did a bit of googling/you tube and it seems to appear on a lot of sytems
Back
Top