01304 827609 info@use-ip.co.uk Find us

Recent content by Minime46

  1. M

    18 hikvision cams recording - hik connect shows 1 random offline

    Ok, apologies for spamming..... but its the app some how. I have logged into Hik-ProConnect and can live view all cameras. They are all live. But on hik connect all 4 of the shed 1 are offline and have been for 5 minutes now.... I really don't know what to do...
  2. M

    18 hikvision cams recording - hik connect shows 1 random offline

    I just checked again and I now have all 4 shed 1 cameras offline.... but when I go on playback, they are still recording.... This is crazy?
  3. M

    18 hikvision cams recording - hik connect shows 1 random offline

    I have a cable tester so think I will get back to that... and work my way through. I have replaced all switches in the mix... all power supplies. All patch leads. I have not tested the AP cables/connectors yet.
  4. M

    18 hikvision cams recording - hik connect shows 1 random offline

    4 are connected at shed 1... Then another 6 are added at the middle shed and beamed back to the office. The weird thing is, ALL cameras were all going back to the 1 reception ap. I thought it might be overloading so I added another on reception and split half cameras on 1 and half on the...
  5. M

    18 hikvision cams recording - hik connect shows 1 random offline

    Both APs at reception are plugged into one of the main network switche and then connected from the network switch to NVR lan port. Yes, I am using a router which has the whole network on 192.168.99.*** Ap's IP's are on .99. And all cameras are on .99. And gateways. I checked to make sure...
  6. M

    18 hikvision cams recording - hik connect shows 1 random offline

    Hi David, Please see a basic diagram. I actually added ubiquiti nanostation 5's on to shed 1 and the middle shed and on reception to split the load going through the TP link AP.... this did not fix the issue. I tested all cables in shed 1, all fine, replaced the poe switch in shed 1 and in...
  7. M

    Firmware Firmware upgrade needed Ds-7732NI-k4/16p

    Hi guys, I have a Ds-7732NI-k4/16p currently running V3.4.107 build 190927 It's time to upgrade to some improved firmware but not sure if I can jump from this to the new straight off or if I have to do it in steps? Can anyone tell me which version I now need or which versions I have to...
  8. M

    18 hikvision cams recording - hik connect shows 1 random offline

    Hi Guys, I have 18 IP cameras - 4mp hikvision turrets. Some of these are passing through upto 4 TP link cpe220's (and 3 x 100mbps switches, 1 switch at the 4 cameras, 1 x mid point, 1 x reception/receiver) then into the NVR. Cameras had lag on install, so I lowered quality and that fixed the...
  9. M

    Door Entry Modular intercom indoor station issue

    In IVMS it doesn't show up in refreshed list of online devices, but if I add the ip manually... it adds it and says online.... very strange. Any ideas why it's not showing up?
  10. M

    Door Entry Modular intercom indoor station issue

    Hi guys, Iv fitted an indoor station at home. It is plugged into a switch which is connected to the Internet as well as my ip cctv system network. I have turned off the WiFi feature on the indoor monitor. IME (outdoor modular intercom) is showing on SADP but I cannot get the WT (indoor station)...
  11. M

    cctv - Wireless from NVR to kitchen montior

    Hi all. I have 5 hikvision cameras and hik recorder. I need the NVR for 5 cameras in a locked unit in the office but want to display and monitor in the kitchen. I have the Internet to the recorder via gigabit powerline adapter into a plug socket. It's a very old house, no loft space to get...
  12. M

    18 cameras - slow, low quality - cat5?

    Hi Guys We have 18 cameras around my farm. Using external TPlinks which have upto 300mbps bandwidth. We have cat5e cable coming from the main office to a tp link which is receiving all 18 cameras. Then going to a gigabit switch then into the NVR. The cameras are 4mp hikvision set to medium and...
  13. M

    Is my switch too small?

    Hi all. Quick question regarding poe switches. I have my house which is my base, large shed 1, large shed 2. Shed 1 I have 4 x HIK 4mp IP cameras plugged into a POE 4 port Hikvision Ds-3e0105p-E switch. I have a TP link plugged into the unlink set to send the image to Shed 2. Shed 2 Has...
  14. M

    HIK cameras on App only load if HD

    Android Newest update Hik 6mp IP turret type not sure model Accessing using HIK-connect to NVR Using phone and WiFi... same issue. I'm stumped
Back
Top