01304 827609 info@use-ip.co.uk Find us

Recent content by mozso

  1. M

    Firmware Latest HikVision Firmware for G3 Series cameras (2xx6G2/2xx7G2/3xx6G2/3xx7G2) - V5.5.160

    Great, only purchased AcuSense 1 year ago and at that time it was deemed quite new on the market, not even available in the UK. My AcuSense NVR quickly became EOL, now my G3 cameras are also EOL. This is a bit of letdown.
  2. M

    AcuSense NVR generations?

    Hi Guys, I have a DS-7608NXI-I2/4S AcuSense NVR for now 1 year. It was disappointing to see that I'm stuck at 4.1.18 firmware and nothing new since, while other NVRs regularly get updates and are around 4.40.x firmwares. Today I have discovered on HikVision EU portal there are new downloads...
  3. M

    G3 AcuSense Firmware 5.5.135 - Motion Detection Issue

    My mistake, I was running camera firmware of 5.5.131, but as you said also 5.5.134 has this problem. I have selected human target to be sensed in motion detection, but it often recognize movement of leaves also as a human target.
  4. M

    G3 AcuSense Firmware 5.5.135 - Motion Detection Issue

    How can you do this that your area drawings keep intact? DS-2CD2086G2-I AcuSense camera 5.5.131 firmware This is what I draw using camera web GUI, then save: After navigating in camera web GUI and returning back to motion detection section within a few seconds, this is what I get: Seems to...
  5. M

    Camera offline - Network abnormal error

    I have four Hikvision DS-2CD2086G2-I cameras attached to a HikVision PoE switch. Exact same camera after 10-12 days operation switched offline. Three times so far since I have installed them, all other cameras are ok. I have tired to switch ports on HikVision PoE switch, but no luck. I was...
  6. M

    Hik-Connect AcuSense camera region entrance detection issue

    Thanks Dan, I have read in some HikVision material, that intrusion detection alarm is inferior to region entrance detection alarm type. And region entrance is suggested instead intrusion detection. Can you confirm this? Thats why I wanted to get Hik-Connect alarm for region entrance detection...
  7. M

    Hik-Connect AcuSense camera region entrance detection issue

    I have 4 2086G2 cameras, all of them reliably trigger line crossing and intrusion detection alarms and none of them ever triggered a region entrance or region exit alarm. Camera firmware: V5.5.98 build 190828 NVR firmware: V4.1.17 build 190911
  8. M

    Hik-Connect AcuSense camera region entrance detection issue

    Hi Dan, Yes, latest version of Hik-Connect application is used. Line crossing and Intrusion detection event trigger alarms in Hik-Connect application, but Region Entrance does not.
  9. M

    Noisy fan hikvision NVR solved with silent power bricks

    This maybe helps for some of you. Different HikVision NVR (no PoE, no noisy PSU), different approach, but similar Noctua fans were used as the original DVR was really noisy with it's sole 40x40mm fan. Unfortunately it was also not silent enough, if I switched to Noctua 40x40mm fan. It was better...
  10. M

    Hik-Connect AcuSense camera region entrance detection issue

    D2 camera was set up for region entrance alarm using NVR D3 camera was set up for region entrance alarm using camera's own web interface At least D2 camera shows something in the logs of the NVR, but Hik Connect application never gives a warning.
  11. M

    Hik-Connect AcuSense camera region entrance detection issue

    Hi Guys, I have trouble to set up region entrance alarm and/or recieve a warning via Hik Connect smartphone application (iOS). Setup: Hikvision DS-2CD2086G2-I(2.8mm) AcuSense camera Hikvision DS-7608NXI-I2/4S AcuSense NVR First try: Set via NVR configuration menu: region entrance detection...
  12. M

    Detection zones/ line crossing

    I have DS-2CD2086G2-I 2.8 mm AcuSense cameras. Let me know what I should check? I have currently 2 smart events enabled per camera. Line crossing and intrusion detection. For line crossing I have multiple lines defined. Sometimes cameras offer more functionality when configured directly (login...
  13. M

    How-to: Do It Youself - How To Silence a HikVision DS-7608NXI-I2/4S AcuSense NVR

    Hi Dan, Many thanks for your comments. Can you please suggest a path to follow, if I want to make sure a reliable alarm is triggered when a human enters the purple area. Should I rotate the AcuSense 2086G2 camera away from the wall to allow more IR (infrared) coverage? IR reflection from the...
  14. M

    Firmware Latest HikVision Firmware for I-Series NVRs - V4.22.005

    Hi Guys, Can you please help what is the latest firmware available for my NVR? It is an AcuSense DS-7608NXI-I2 / 4S, as I see it is not a full i-series device. Device has OEM V4.1.17 build 190911 firmware on it by default. Can I use firmware for i-series? Or there is a difference in hardware...
  15. M

    How-to: Do It Youself - How To Silence a HikVision DS-7608NXI-I2/4S AcuSense NVR

    Hi Guys, I'm new to business here, but have made a video tutorial to decrease fan noise on my AcuSense 7608-NXI-i2-4S device. Maybe this helps others as internal construction of many NVRs from HikVision seems to be almost the same. I also have some questions towards the community. 1. What is...
Back
Top