Recent content by Newtothis

Thanks for the tip. The other end of the powerline was connected to a switch. I connected direct to the Sky Hub instead and all is working again. Thanks again!

I have recently had to connect my Sky Q box to an ethernet cable via a powerline adapter, as soon as i do this, Local device on Hik Connect cant be found and i cant reach the NVR through a web browser. Both NVR and Sky Q box have reserved ip adresses. As soon as i disconnect the ethernet from...

I mean to rename them in the preset list on the nvr web interface. Logged directly to the camera web interface, i can rename each preset in the list.

I can name the presets on the camera web interface, but they don't show and i cant find a way to set them from the NVR interface. Is it possible?

I think i had somthing similar when setting up a DS-2DE4A225IW-DE. I gave preset 2 all the hours i wanted it there, because after tracking at night it would revert to preset 1. Then gave preset 1 a larger amount of time because sometimes it would not go to preset 1 position.

Any update? I only have smart tracking enabled with smart events. During the day (preset 1), All lines and motion detection areas are where they should be. At night (preset 2) is a more zoomed in, slightly different angle view. The Lines have remained where they were set, but the motion area has...

The NVR is V4.30.085 build 210409 Camera is V5.7.1 build 211015 I didn't want to update the camera after reading about losing auto tracking.

DS-2DE4A225IW-DE 7604ni-k1/4p(b) When setting smart events (Line crossing/intrusion detection) the line/area locks into place even when moving the camera. With motion detection, the area seems to follow the camera view. Is there a way to lock this in place?

Hi, Im looking to update the firmware on my DS-2DE4A225IW-DE(S6). Would this be the correct one? Just "(security version)" is making me wonder. Thanks.

Thanks, I only have room for 1 camera at this point. I needed an overview but also wanted a better chance to identify someone. I also wanted a better view for small wildlife. DS-2DE4A225IW-DE(6) is ordered. I know 1 camera will not do everything I want but I think the 25x zoom and extra clarity...

Thanks, Dan. Would the DS-2DE4A425IW-DE(6) OR DS-2DE4A225IW-DE(6) be an improvement over the DS-2CD2385G1-I in low light too? I prefer to use the street lighting and keep it in day mode without any extra lighting coming from the camera. What is Hik connect like to control the PTZ? Is there any...

I Have a ds-7604ni-k1/4p(b) with 1 X DS-2CD2385G1, 1 X DS-2CD2365G1 and 1 X DS-2CD2522FWD. I would like to swap the DS-2CD2385G1 with a PTZ camera with good low light performance and a zoom of at least X4, and maybe even upto X25. Is there somthing that you can recommend for me please? The...

I recently moved house and had to change my internet provider. I am now with Sky, with a Sky Q router. I setup my DS-7604NI-K1 and cameras connected directly and everything is working fine apart from remote viewing events. I can view the cameras live view, over mobile data just fine, but...

Do Hilook cameras work with Hikvision NVR? I have a DS-7604 NI-K1(b) With an empty port and was wondering if a Hilook POE camera would work with the NVR?

I have a 4K camera overlooking the front of my house. In daylight, if i digitally zoom x4, is the image similar to what i would get with a 1080p camera with 4x optical zoom?