Thank you for getting back to me Phil.
I thought it might have been a issue with door entry cams.
It must have been the weather as it been good as gold for some time now.
Many Thanks
Nigel
Good Morning
I’ve recently fitted a Hikvision DS-KV6113-WPE1(B) an after about todays of it being installed I’ve noticed that the lens has condensation on it.
Has anybody else had this trouble?
Nigel
I can’t say I much experience with the K4 as my ANPR is running on a I2. Have you tried logging on camera directly an clicked on to the Road Traffic tab then click on Detection Configuration make sure you have ticked enable an set up the area with the detection lines.
Just seeing if anyone else has had any the following problems.
Put the camera in to the highest resolution, when the siren or strobe is activated it returns to a smaller resolution?
I’ve also noticed by setting up the camera in the web view setting Video & Audio to recorded it will work fine...
Thats ok your more than welcome.
I haven’t yet mine is in 2.8mm where the last camera was a 4mm I will need to get hold off a 4mm at some point.
I think the problem is that a lot of suppliers don’t have the stock an are waiting for stock to come in.
I've just been trying to find away to turn off the Alarm an Strobe on my G2 for a few weeks now.
Tried the One-Key Do Not Disturb function in Hik-Connect, but found out that only stops the notifications an doesn't turn off the Alarm and Strobe.
The only way I have found that dose work to...
Hi
I can help you with that. for the model number you have provided it belongs to the G1 Platform (Non-Fisheye)
Note: the second link is to the latest firmware its been put in to a different folder as it is a temporary version for some bug fixes.
Hope this helps...
Hello Everyone
Just came across the new firmware for the I Series V4.40.15 Build 200616
An the release notes are also attach.
http://www.hikvisioneurope.com/uk/portal/?dir=portal/Product%20Firmware/Back%20Ends/NVR/%5B76%2077%2096%20NI-I%5D/V4.40.015%20build200616
I'm not very familiar with you DVR, the only experience I have is with I series. To get to the ANPR Settings go to Systems -> Events -> Smart Events -> Click on your ANPR Cam in list.
Make sure that save VCA Picture is checked marked as it will not save picture to the NVR.
Both of the firmware...
Hello
I must say I have never seen this before, what I have seen before under "province/state abbreviation" is Chineses sates in English displayed, have you tried setting it up through the NVR/DVR direct instead of going through the web browser?
Also there is a different firmware for the 4...
Hello I've had this problem before but with the NVR and have found out that it was because I was using Excel on the Mac, so I found that if I use Excel in Windows it seemed to work first time.
Also I have noticed that the 4 line ANPR that is a different firmware on the portal with a newer build...
There has been a new build version released on the 15th V5.6.10 Build200409
http://www.hikvisioneurope.com/uk/portal/?dir=portal/Product%20Firmware/ANPR/7%20line/UK%20Baseline%20%28%20Support%20new%20%26%20old%20Zatpark%20protocol%20%29%20
Hikvision have also this time kindly uploaded the...