Phil's latest activity
-
Thank you very much
-
Phil reacted to Kyle's post in the thread DS-2CD2387G2H-LISU/SL strobe light doesn't work on Motion detection? with
Like.
Hi Mashhood You need to log into the camera directly in a web browser to access the advanced settings for the strobe light and audible... -
Phil replied to the thread Hik-Connect I can't control the strobe light and audio alarm?.We'll need you to share the devices that you have and their current firmware version please. Also, what version of Hik-Connect you are...
-
Phil reacted to JB1970's post in the thread Most reliable event trigger type during night? with Like.
In your Hik-Connect app - Me > Settings > Display VCA Rule. The overlays will allow you to see what's happening while you wander around...
-
Phil replied to the thread Dahua IP video door station -- Alarm inputs on VTH.Sorry, we don't tend to get many Dahua experts here at this forum (most are experienced with Hikvision only).
-
Phil reacted to pseu's post in the thread iVMS-4200 Problems with IVMS 4200 and the maximum 1024 cameras limit? with Like.
HOTELS
-
Phil replied to the thread DS-2DF8225IH-AELW (Darkfighter X PTZ) restarting after dark?.Yes, it is most likely that the units that you initially tried were not able to supply enough power / cope with the current drawn by...
-
Phil reacted to Ugo's post in the thread iVMS-4200 Cannot see any remote playback on iVMS4200? with Like.
Hi alfaclvi, problem solved :) . I had to wait some time till the DB with footage was rebuilt completely and now I can see all the...
-
Phil reacted to JB1970's post in the thread Intruder alarms - Hikvision AX Pro vs Pyronix Enforcer v11? with Like.
TBH if your house is under renovation I'd be installing the required cabling for a wired system. Even today nothing beats a wired...
-
Phil reacted to Kyle's post in the thread AX PRO Hikvision AX Pro Alarm - Sounder Connectivity? with Like.
You need to be logging in with the Hik-Connect administrator account credentials to access the firmware, so you should be seeing that...
-
Phil replied to the thread iVMS-4200 Problems with IVMS 4200 and the maximum 1024 cameras limit?.Really intrigued to know what you are using 2,000 cameras for?
-
Phil replied to the thread Simple indoor security camera?.Almost everything that we offer is Pro kit and non-WiFi (meaning that you would need to install and connect a network cable back to your...
-
I think you can still use the POE switch to set the camera up to work without the NVR, and then also add it to the NVR across the...
-
Phil reacted to MACCCTV's post in the thread Smart event vehicle detection linkage action? with Like.
Thanks Kyle. Impressed by your prompt replies! If I can get the ANPR Camera to work over the POE switch, then I can remove the need for...
-
Phil reacted to Kyle's post in the thread What's the optimal camera resolution settings on my Hikvision NVR? with Like.
That's the highest resolution setting on your camera (2560*1440 = 4MP), so your installer has set it correctly :) It means you'll get...
