Recent content by TaHzO

Thanks for the information. Can you tell me where exactly you put the silica gel bag? I'm not using a dome camera by the way - it is a DS-2CD2085FWD-I and DS-2CD2685FWD-IZS. By the way: I observed this phenomena by other mounted DS-2CD2085FWD-I. It just took something like a week and the fog...

I did a clean install of Catalina and a clean install of iVMS ....

I'm using 2.0.0.10 build 20190625 and it's working quite ok. I don't use HIK Connect at the moment ...

I'm running several DS-2CD2085FWD-I cameras (FW V5.5.83 build 190221) in a new building for some days. I'm observing foogy day view problems and don't know at the moment what this caused. Please see attached pictures - you can also see that the problem gets worse even during the afternoon...

Just to finalize my experiences using Hik Connect. In the end I ended up adding the NVR via port forwarding to my iVMS software. A lot of functionality was missing using Hik Connect ... like event configuration etc. I also deactivated the platform access in the configuration tab in order to be...

OK... - on Windows it works when I manually enter at each camera the verification code. Then I can get access to live view etc. Updates will follow...

OK - I have done the following. I connected the NVR locally to a monitor and keyboard and deactivated the encryption like mentioned in the link above. However, I was not able to see the live view on the NVR in the browser - the error stays the same. I then entered the verification code under...

... while googling around I found the following: Hikvision NVR not detecting Hikvision cameras I will not have access to my NVR locally via monitor connected in the next days. Will try it in the next days and will keep you up to date.

Hi Phil, thank you for your reply. I tried to access the NVR directly over the HIK-Connect account but was not successful. I can see the device with serial no. and URL and also as "online" but I'm not able to access it. The links is dead ... However I also figured out that I'm not able to see...

Phil - thank you for your time and effort. The mac is not in the same network - I'm trying to access via the internet without having configured any port forwardings yet. I know the LAN IP adress of the NVR. From outside over the internet it works with IVMS4500 and iOS. Please see attached...

Hi, I have a DS-7616NI-I2 / 16P running V3.4.96 build 170921. I successfully activated Hik Connect platform access and I'm able to connect via iVMS-4500 and Hik Connect App on iOS. However, I do not manage to access to my NVR with iVMS-4200 Mac v.1.02.05.02. I'm able to login to Hik Connect...

So - I did my test today and everything is working fine. I used 2 x 15 m USB 2.0 extensions and 15 m VGA cable and 15 m HDMI cable in my tests. This worked well. I have another problem with my DS-7716NI-I4-16P. I installed 2 x Western Digital red 4 GB HDD. In the NVR the two HDDs are displayed...

I already tried with VLC and it is working great - thank you very much.

Hi Bob, thank you very much for this detailed manual. I'm wondering if it is possible to view the recorded files on the CD card directly without accessing the camera. I have a use case where the customer wants to eject the sd card out of the camera and view the recording on his computer, putting...

I'm also thinking about minimum 10 m but I just searched on amazon and found some usb extension with active "support" - concerning the reviews it should work quite well. I will test it in the next weeks and will keep you up to date to share my experiences.