NVR DS-7608NI-I2 / 8P
Firmware V4.22.005 build 191208
All IP cameras running the latest firmware (checked last night)
Looking at the NVR log from last night I had the following IP 22.214.171.124 from The Russian Federation trying for 3 hours to gain access.
WEB Hikvision IP...
Sorry to bump an old post but Im am getting increasingly concerned about the Hacking attempts on my Hikvision NVR.
This time last month in a 7 day day period I was getting 4-6 illegal login attempts...
Since the lockdown, In the past 2 days I have had 675 illegal login attempts showing on the...
Thanks Kyle & Stewart... I did the installers course 3 years ago and a bit rusty... :)
It was previously my own kit that I sold locally on marketplace 3 years ago and ended up offering to help configuring it for him and ended up spending 2 days installing the whole system including hdmi feeds...
Thanks for your reply.
I didn't think it was possible to interrogate the IP cameras with SDAP without plugging directly into the NVR port?
If I try SDAP using WiFi or via the router port all I get is the NVR.
Im now convinced its the camera passwords that are wrong as the owner has admitted he...
Hello guys need help on the following error? “Network unreachable“
DS-7608NI-E2/8P with DS-2CD2T42W-I8 and DS-2CD254FWD
No live view on NVR GUI and all cameras showing yellow warning triangle “Network Unreachable“ when I click on icon.
I have tried manual camera connection inputting password...
No problems with high beams, the images below show a Mondeo with LED dynamic headlamps on full beam along with an auxiliary Lazerlights Triple R 1000 elite rated at 9020 lumens. Once the auto iris adjusts it can read the plate.
Here is my current setting which works night and day on both forward and back reg plates.
Firmware V5.4.7 build 180309
Mounting scenario: Normal
Saturation 0 (still produces colour image)
Iris mode Auto
Auto iris level 100
After enduring 7 weeks of intermittent Sky fibre unfortunately every time Hikvision’s engineer went to remotely scrutinise my system it was offline.
I now have a solid connection and should reopen the ticket.
So no not fixed yet
Kitchen smart tv Hikvision access.
Looking for possible workarounds on getting CCTV working on Panasonic smart TVs.
I could run a HDMI Splitter from NVR in loft and run a 2nd HDMI cable to the TV, I have a long enough cable but it’s hassle.
Smart TV Web Browser:
I can bring up my Hikvision WAN...
No further news :(
Post-Pre Record Fault:
I have been in touch with Hikvision Tech Support via email and the Post/Pre record error is still there on all channels.
They have logged in directly to my NVR and checked all advanced settings which appear to be OK.
They cannot explain why this is...
Looking at your screenshots you are not logged in directly to the camera's WebGui, you are in fact logged into the AVR which is why you are not getting the full settings.
To get advanced settings you must log into the Camera's WebGui :(
Take a look at my screenshots and you'll see the difference.
This has been superseded by
Have you tried running the SADP tool to locate the NVR on network?
Once you can see the NVR click on the IP address and log in using IE11 then go into "Network" "Advanced" then put a tick into "Virtual Host"
Then go back to "System" "camera management" then select the IP camera you want to log...
I have the same camera in ANPR mode.
You need to log in to the camera via a webpage to do the advanced setup, the NVR will only do basic setup.
My Image settings are:
Iris mode "auto"
Auto Iris level 100
Exposure time 1/150
Smart supplement light...