• Hi Guest, Please subscribe to our YouTube channel for fresh new videos each week.

Search results

  1. U

    Newbie help needed with choosing a CCTV System

    Cabling was a cinch. I just purchased a drum of armoured CAT5 cable in and dug it about 8 inches down into the flower beds around the side of the fence. I have a switch in the garage and just one CAT5 cable from the garage back to the house connecting everything to the NVR
  2. U

    Newbie help needed with choosing a CCTV System

    Turret cameras can be mounted vertically. As long as cameras are on the same network they will work. Just connect the wireless cameras to a wireless access point which is on the same network. You need to run a cable to the wireless camera anyway to power it, so it it not better to just use all...
  3. U

    ZIP IP Cameras & NVR's

    Hi Phil, Here you go... https://www.systemq.com/categories/Product-ZIPNVR Maybe a product that System Q have rebranded as their own?
  4. U

    Newbie help needed with choosing a CCTV System

    https://www.use-ip.co.uk/forum/threads/ip-cctv-buyers-guide.1816/ Take a look at this for some good information
  5. U

    ZIP IP Cameras & NVR's

    Does anybody have any experience with ZIP products? I am used to using Hikvision equipment but wondered how the ZIP products compared? Worth a try or stick with Hikvision? Paul
  6. U

    Hikvision - pre/post record via alarm input

    There is no option to do continuous recording and alarm recording as you desire. The nearest option is "Motion | Alarm", which is motion OR alarm. Why don't you set it like this and turn the sensitivity right up on the motion detection, pretty much as good as recording all of the time? On a...
  7. U

    Hikvision - pre/post record via alarm input

    Hi there, In the advanced storage schedule of the NVR I have it set to 10 seconds pre record and 10 seconds post record. I have however set each of the GJD's to latch on for 30 seconds once the are triggered. So I get a total record time of 50 seconds but it is a definite trigger so not a waste...
  8. U

    Hikvision - pre/post record via alarm input

    Hi all, Just to let you know I've figured out a solution to my problem. Managed to get some wireless PIR's that connect back to a controller with a volt free output. Got a little package where up to 3 PIR's can be connected to one controller and you can set the time that the alarm latches up to...
  9. U

    Hikvision - pre/post record via alarm input

    NVR - DS-7732NI-I4/16P/KB Firmware V4.1.50 build 180227 I have recently set up my NVR with PIR's on an alarm input to provide more reliable recording when somebody is on the driveway. Is it possible to differentiate the record duration of an alarm to that of video motion detection? I was...
Top