DS-7104NI-SN/N : 2 IPCam to NVR - 2 IPCam via wired and 2 via wireless

[bien gomez]

Hi

I wanted to ask maybe somebody here is able to try this and is this setup recommended?
The 4-Port NVR uses 4 IPCameras but the 2 of them needs to be installed farther (more than 100 meters).

I was thinking of connecting the 2 IPCameras using 4 APs
IPCam1 & IPCam2 = wired, directly connected to NVR
IPCam3 & IPCam4 = NVR Port ---> AP1 ((( wireless ))) AP2 <-- IPCam
* AP1 is AP mode - AP2 is APClient mode.

We simulated IPCam3 and it worked (so far no problem).

What I am afraid is that this may cause problems in the future and I wanted to
check this forum for suggestions/advice.

Thanks.

 

[Kieran]

Hi

We can't envision any problems down the line, wireless bridges are usually very reliable so by all means crack on!

 

[bien gomez]

Hi

We can't envision any problems down the line, wireless bridges are usually very reliable so by all means crack on!

Hi Kieran

Thanks. What I am afraid of now is that "what if" during the course of normal usage, we might
encounter problems with the wireless link.

Thanks Kieran.