01304 827609 info@use-ip.co.uk Find us

Hikvision EasyIP 2.0+ Cameras

Not open for further replies.

Keoni Granger

Hikvision EasyIP 2.0+ Cameras
Release date: June 2018
Resolutions: 2MP, 4MP, 6MP and 8MP
The Hikvision EasyIP 2.0+ family of cameras were released in June 2018.
It includes a range of cameras in 2MP, 4MP, 6MP and 8MP resolutions.
This family directly supersedes the 2MP and 4MP cameras from the EasyIP 2.0 Family.

In this thread you'll be able to find:
  1. The key features of this family
  2. Links to the product pages of the models we offer
  3. Where to find the most up to date firmware for your camera
Key Features
  • Range of focal lengths -
  • H.265+ video compression -
    • Hikvision literature states that H.265+ offers a 83.7% saving on bandwidth over H.264 and a 66.8% saving on bandwidth over H.265
    • 82.5% saving on storage over H.264 and a 66.4% saving on storage over H.265
    • Please see our write-up for more information on H.265+ video compression
    • You can also see our impressive results from a H.265+ codec test on our YouTube
    • PLEASE NOTE: Datasheets may state a codec of H.265 but this is simply because they were created before H.265+ was available
  • EXIR 2.0 LEDs -
    • EXIR 2.0 LEDs are an improvement on Hikvision's previous EXIR (EXtended InfraRed) LEDs.
    • Lifespan improvement
    • Improved heat dissipation
    • Smaller
    • Improved weather resistance and temperature resistance
    • For more information please see our post about EXIR 2.0
  • SD Card slot -
    • With previous Hikvision families only selected models supported on board storage
    • Every model in the Hikvision EasyIP 2.0+ family has a built-in micro SD card slot
  • IP67 rated weatherproof housing -
    • IP66 rated weatherproof housing was the standard for previous families such as the R0/EasyIP 1.0 and R6/EasyIP 2.0.
    • IP66 = Able to protect against powerful water jets
    • IP67 = Able to protect against immersion up to 1m
    • For more information please see our video on Understanding IP & IK Ratings
  • IK10 rated vandal resistant housing (Selected models)-
    • IK10 = resists 20 joules of impact energy
  • Audio (selected models) -
    • Some cameras are available with
      • Audio I/O
  • Up to 3 streams -
    • Main stream/sub stream/third stream
    • Offers flexibility with bandwidth without sacrificing video quality
  • Alarm triggers -
    • Motion detection
    • Video tampering
    • Network disconnect
    • IP address conflict
    • HDD full
    • HDD error
    • Illegal login
  • Behaviour Analysis -
    • Line crossing detection
    • Intrusion detection
    • Face detection
  • PoE or power supply -
    • Every camera has the option to be powered by either PoE or a 12VDC PSU
    • PoE offers a simple solution which allows power and data to be carried down one network cable
  • Wide Dynamic Range -
    • Wide dynamic range improves image quality by balancing the lighting in an image where there may be contrasting areas of intense dark and light
    • For more information please watch our informative video about Wide Dynamic Range and other datasheet terms.
  • 3 Axis adjustment -
    • Allows cameras to be adjusted in a variety of ways
    • Makes it easy to cover any area of interest
    • Cameras can be mounted without wall mount arms where this may not have been possible before
  • Mounting options -
    • A variety of mounting options available -
    • Wall mount arms
    • Junction boxes
    • Inclined mounts
    • Pole mounts
    • Corner mounts
Available in our Web Shop

2MP - DS-2CD2123G0-I/DS-2CD2123G0-IS
4MP - DS-2CD2143G0-I/DS-2CD2143G0-IS
Motorised Zoom Dome

2MP - DS-2CD2723G0-IZS
4MP - DS-2CD2743G0-IZS
8MP - DS-2CD2783G0-IZS

2MP - DS-2CD2323G0-I
4MP - DS-2CD2343G0-I
8MP - DS-2CD2383G0-I
Motorised Zoom Turret

2MP - DS-2CD2H23G0-IZS
4MP - DS-2CD2H43G0-IZS
Mini Bullet

4MP - DS-2CD2043G0-I
6MP - DS-2CD2063G0-I
EXIR 2T Bullet

2MP (I5) - DS-2CD2T23G0-I5
2MP (I8) - DS-2CD2T23G0-I8
4MP (I8) - DS-2CD2T43G0-I8
Motorised Zoom Bullet

2MP - DS-2CD2623G0-IZS
4MP - DS-2CD2643G0-IZS

Finding Firmware
These EasyIP 2.0+ cameras use the G1 Platform firmware.
To find the latest firmware for your camera please see our thread on finding the latest Hikvision firmware for your camera.

As usual, If you have any questions, please feel free to let us know :D
Last edited:
Not open for further replies.