01304 827609 info@use-ip.co.uk Find us

Hikvision NVR suffered power outage, will not boot or start up at all

theworldisacube

New Member
Messages
2
Points
1

Hikvision DS-7732NI-I4/24P NVR unit, went through a power outage and now will not boot at all-- what is the best way to proceed?


Thank you
 

Hikvision DS-7732NI-I4/24P NVR unit, went through a power outage and now will not boot at all-- what is the best way to proceed?


Thank you
It is possible the internal power supply has failed, this could've blown other components on the main pcb. You could take a chance and replace the power supply.
 
@theworldisacube disconnect your NVR from the electrical supply and remove the lid (this will invalidate any warranty you have). The attached picture should
be the inside of your NVR and I've marked the PSU. The model number will be on the white label stuck on the psu. search the internet and if you find one make sure it is exactly the same model.

replacing the PSU does not guarantee the NVR will work,
 

Attachments

  • Screenshot 2021-01-18 at 14.46.46.png
    Screenshot 2021-01-18 at 14.46.46.png
    470.6 KB · Views: 869
Back
Top