• Hi Guest, Please subscribe to our YouTube channel for fresh new videos each week.

Latest HikVision Firmware for EasyIP 3.0 Cameras - new V5.5.83 (G1 Series cameras)

Status
Not open for further replies.

Phil

Administrator
Staff member
Messages
2,967
Points
83
Thread starter #1

Attachments

Last edited:

pyrotenax

Member
Messages
32
Points
8
#2
I have just updated my DS-2CD2335FWD-I with this firmware and getting garbled configuration menu when logging in directly with IE to cameras ip address ...
I am unable to click on anything on the left hand side.
 

Attachments

Phil

Administrator
Staff member
Messages
2,967
Points
83
Thread starter #3
 

Amertat

New Member
Messages
26
Points
3
#6
I have just updated my DS-2CD2335FWD-I with this firmware and getting garbled configuration menu when logging in directly with IE to cameras ip address ...
I am unable to click on anything on the left hand side.
USE CTRL+F5 it may save your day :)
 

Ahac85

New Member
Messages
6
Points
1
#7
Is it possible to downgrade to a previous firmware from this version? I noticed sometimes cameras freeze for a few seconds on this firmware
 

Phil

Administrator
Staff member
Messages
2,967
Points
83
Thread starter #8
Yes, just run the firmware update as normal, but select an earlier firmware version.

Caveat - occasionally there is a firmware update which makes changes which cannot be backdated. Hikvision normally state this in their Release Notes.
 

Giz

New Member
Messages
5
Points
1
#9
Just upgraded firmware on DS-2CD2355FWD-I with V5.5.83 and worked well although it took a few minutes to confirm all was ok. I upgraded the NVR firmware first (4.21.000 most recent). I believe both are designed to work together. The only issue I had was with iVMS4200 latest Windows version V3.1.0.05 and the Mac version V2.0.0.5 neither of which seem to work on my hardware. It doesn't help that there are 3 download sites to choose from Hikvision.co.uk and the UK or Europe Hikvisioneurope.com. I chose the latter as it has more up to date releases. Hikvision either need to ditch the other 2 or keep them in sync as it is very confusing.
 
Status
Not open for further replies.
Top