MaxxOne Falcon H265 NVR

[janafolly]

Hi everyone,

I have a MaxxOne CCTV System using 4K 8mp IP UHD 3.6mm POE Cameras.
Have had 3 of the 4 fail with water ingress, and a 4th just hanging on. Not cheap either.
System just over 3 years old.
Would like to retain the Falcon NVR and as the POE wiring is in place just replace the cameras with another manufacturer.
Is this possible?
Any advice much appreciated.

 

[Dan]

Hi @janafolly

We have no experience with MaxxOne but looking at their website their NVR range would appear to be ONVIF compliant which means any ONVIF camera should work ok for basic live view and recording.

We would probably recommend Hikvision as they are the best quality/most affordable option we sell.

 

[janafolly]

Thanks Dan, not sure to stick with 4K or go down to 5mp. Will see.
Thanks again.