VCC-HD4000 and Synology Server setup help needed

[aircub]

I am trying to get my VCC-HD4000 running with Synologys Server and Surveillance Station software.

It will not recognise the came as it says my setting are wrong. Looking through the manual and the net I cannot find what the source path should be can anyone help.?

 

[Phil]

Hi aircub,

This info from a previous support conversation may lead you to something helpful?

You can also gain access to the camera without establishing session. (no session) Please refer 6.4.1 (page 62 & 63) Use "Anonymous user log in" and "No session management"

Page numbers refer to the camera manual.
Let me know if that moves you forward at all.

 

[aircub]

The only manual I have has 43 pages

http://us.sanyo.com/dynamic/product/Downloads/VCC-HD4000_English_Only-22394017.pdf


do you have a link to the manual you are referring to.

 

[Phil]

Hmmm I'll have to try to find out what manual Sanyo were referring to ...

I'll get back to you.

 

[Phil]

aircub,

I think the source path should be some version of this:

http : //192.168.0.2/liveimg.cgi (Ex. IP address = “192.168.0.2”)

As you have already set the IP address in your Synology unit you probably only need the /liveimg.cgi part.

You may also need to set compression to JPEG for this to work.

 

[KeithB]

A server path of:
/liveimg.cgi?serverpush=1&jpeg=1
works for an HD3300 on a different DVR.
The HD3300 and HD4000 are the same engine so that should work.