Veracity PINPOINT IP Camera Focusing Adaptor VAD-PP
Local viewing of IP cameras
Uses network POE
Rapid adjustment of focus
Essential installation tool
Low Cost, Re-Usable Device
Installs In Seconds - Removes in Seconds
Powered via Pass-Through POE
10 Base-T or 100Base-TX Ethernet Interface
IEEE 802.3af and IEEE 802.3at POE Standards
Dimensions: 65mm(L) x 32mm(W) x 20mm(H)
100mm Flying Lead
Please note that the VAD-PP may not be available for Next Working Day delivery. Please contact our sales team at email@example.com for stock inquiries.
Veracity's PINPOINT adapter allows IP video installers to easily set up and focus Power Over Ethernet (POE) enabled cameras. No temporary local power source for the camera is required, as PINPOINT enables the camera to draw its power from the installed POE network cabling, whilst re-directing the actual Ethernet network connection to a local laptop, netbook or even PDA.
This camera focusing adapter is a simple, yet extremely useful installation tool for IP cameras. Temporarily inserted into the network connection, PINPOINT passes through POE from the network to the camera whilst diverting the network connection to a local connection for a laptop or netbook. Thus it allows the accurate positioning of the camera including fine-tuning of viewing angle and especially focus, which is critical for megapixel cameras.
The below diagram shows the PINPOINT is inserted between the POE network and the IP camera, diverting the IP camera network connection to the local PINPOINT RJ45 port for a laptop connection.
Veracity's PINPOINT adapter solves a common problem. How do you view the image or configuration page of an IP camera locally, without disconnecting it from the network and losing POE power? By routing POE to the camera, and diverting it's network connection to your laptop or PDA, PINPOINT lets you get your camera focused and set-up quickly and accurately.
Follow the simple steps to use the PINPOINT device.
Disconnect the POE Network Connection to the IP camera
Insert the PINPOINT flying network lead into the IP camera
Insert the POE network connection into the PINPOINT
The camera will now power up normally
Connect a laptop or netbook to the PINPOINT network port
Run the IP camera configuration program
Adjust camera direction, lens settings and config as required
Save configuration settings in the IP camera
Physically lock down the IP camera mount/lens adjustments
Disconnect laptop or netbook
Disconnect the POE network connection from PINPOINT
Disconnect PINPOINT from the IP camera
Reconnect the POE network connection to the IP camera
The camera will now power-up with the correct settings
Re-use PINPOINT for the next IP camera installation
Shipping and Returns
We offer free delivery via courier throughout the mainland UK. You will receive a confirmation email from us as soon as your goods are dispatched, and this will confirm your carrier and tracking number so you can monitor your order's progress. Any items sent via our standard free delivery will typically be with you within three business days.
For those requiring their order urgently, we offer a range of next working day and Saturday delivery options which you can select at checkout. Please note we must receive your order by 3.30pm, Mon-Fri in order to guarantee your order is with you by the next working day.
We are also able to offer shipping to any country in the world. We charge a flat fee of £15 + VAT for any country within Europe, which will be available to you at checkout if your country is listed on our International Shipping page.
If you're based outside the EU, please contact us at firstname.lastname@example.org with your order details and full delivery address, and we'll get back to you quickly with a quotation including shipping costs.
Please note we can only accept payment and provide quotations in GBP £ Sterling, and that we must receive full payment before we are able to ship out any goods.