ipcamera

Hello everyone, I'm embarking on a project to set up a CCTV network comprising roughly 50 cameras. The challenge here is that these cameras won't be on the same network, and some of them need to be compatible with 4G. (Up until now, I only set up CCTV in the same network.) Here are my primary...

Hi Everyone! I m trying to download some footage from two Hikvision Ip-cameras, though the network, using Microsoft Edge in compatibility mode. I already tried to tinker around the settings, but without any luck. The footage seems to be saved on the pc, but the directory is simply not created...

Hello, I am looking for some advice on the Hikvision PanoVu range, specifically the DS-2CD6D54G1-IZS. Firstly, does anyone know if this is compatible with the Ultra series NVRs (DS-9664NI-I8)? Also when adding the camera to the NVR I assume it uses 4 channels? Is this correct? Thank you.

Hi All, I’m new to this site and new to cctv. However I’m quite into plc automation but lacking terminology when it comes to this subject so I’m really hoping someone can advise me a little. I need to operate an ip camera via an external switch controller. Putting it simple if I had a switch...

I just installed a 100W floodlight and it is causing the cameras to 'band' (I believe this is the correct way of referring to it). Here is an example: These bands slowly move continously down the screen. Although it doesn't cover the entire image, just as much as I have shown in the screen...

We purchased the Hikvision Q1 PT Camera Model # DS-2CV2Q21FD-IW for one of our clients. The issue we are facing is to joining the WLAN camera with the client Wifi Acces Point (TPLINK EAP 225). There are two SSID enabled at the client-side (2.4GHz and 5GHz) and both have the same SSID name and...

Hello and thanks for reading :D Is it possible to format the SD cards with the NVR? The cameras are all plugged in directly with POE and all work perfectly with the app etc, but none of the cameras show up in the SADP tool, nor on the browser (apart from camera management). If I go to storage...

Hi, everyone. I need to connect the several remote IP-cameras (Hikvision DS-2CD2020F-I) to NVR (Hikvision DS-7104NI-SN) through the Internet. The cameras have "grey" IP-addresses. NVR may have "white" IP-address. NVR is located before wifi-router. Could I do this? How can I do this? Thanks.

Here is the system info from my HikVision NVR I forgot the admin password. I googled it and found on a forum to restore all parameters to default setting to fix the issue. I have 3 Hikvision DS-2CD2x42FWD cameras and all are offline. They were working fine before i restored to default...

Is there anyway to record on camera local storage only when it looses connection to the server. Situation Camera is streaming normally to the management server, suddenly it looses connection to the server, in this situation camera has no connectivity to the network server, so it has to record...