01304 827609 info@use-ip.co.uk Find us

What's new

Latest resources

For the 5032 model, 7 series & 8 series
0.00 star(s) 0 ratings
Downloads
10
Updated
For 1009 Mini-NVRs and 5-Series NVRs (except the 5032 model)
4.00 star(s) 1 ratings
Downloads
15
Updated
0.00 star(s) 0 ratings
Downloads
8
Updated
Milesight camera firmware - all current models except the 4K bullet
0.00 star(s) 0 ratings
Downloads
25
Updated
For earlier h.264 model cameras (models never sold by use-IP)
0.00 star(s) 0 ratings
Downloads
1
Updated

Latest profile posts

Hi Dan,

Can you give me some idea how to open garage door with smartphone via Pgm output on Hikvision Hybrid Alarm Central, searched the web but can't find anything, can send pictures of alarm central and garage door switch if needed.

Thanks.
Dan
Dan
Hi @boss007

Your post was stopped by our spam filter, I have approved the post and so it should now be public on the forum.
Hi Dan,

I've only just joined the forum and posted a thread asking if it's possible to mix cameras on the same system but it seems to have disappeared. I have scanned through the forum rules and I don't think I have done anything wrong.
Any ideas?

Regards,
Gary.
Dan
Dan
Hi Gary, your post was caught by our spam filter. I have now approved the post and it should now be public on the forum.
Dan, ANPR operational range.

I have 2.8-12mm 2CD4A26 /P what in your opinion would be the effective plate capture distance when zoom right in, say for a daylight scene senario.

Regards

Karl
Dan
Dan
I don't have details for the 4A26/P model but the installation document for the newer 7A26G0/P-IZS it suggests that at 12mm you will have plate recognition up to roughly 12m.
Screenshot 2021-04-14 at 13.57.14.png

I have also attached the full install guide for further advice on the best way to install for your location.

Attachments

  • 7xxx ANPR Installation & Configuration Guidance.pdf
    3.3 MB · Views: 4
Hi phil,
My Hik Connect app is showing all cameras as failes to start playing. Had no issues since installation over 6 months ago up to this point.
the DVR is connected to my LAN, i can ping to it and it got a DHCP address
i tried to change the server not succuss, also change the ip address from DHCP to static IP, and nothing work i still got error code (2*2002) offline
Many thanks
Hi Dan,

Quick question, I have a DS-2CD4B2(3)FWD-IZS, Having searched the a few avenue's can seem to find a refrence for the No 3 in the part number. Any idea what this means?

Just one other thing, ANPR variants again. Does the presence of /P, mean a camera is able to record plate detail locally to SD card. If so do non /P variants require a NVR to capture the plate info?

Regards

Karl
K
Karloslejackel
Struggling to upload an actual image of the label, I added the brackets to highlight where the number 3 was located within the part number so the brackets aren’t normally present. The following is how it appears DS-2CD4B23FWD-IZS on the box. The year of manufacture is 12/2020. This particular variant doesn’t create many hits during web search’s.
regards
Karl
Dan
Dan
Ok, when googling without the brackets the majority of the sites that are listing this model have European URLs (.de/.fr/etc...) so I can only think that this must be an EU specific model that was only ever sold in the EU, as a UK company that has never seen this product listed before there is little detail we can give you about the product.
K
Karloslejackel
Cheers Dan, Ok this particular camera did originate in France so hence I guess why no one in the UK recognised the part number. It was given to me so can’t grumble and it’s brand new.
Cheers
Karl
Top