LAITH AL ASSADY
New Member
- Messages
- 1
- Points
- 1
Hy everyone .
My DVR dose not work on schedule record mode !!!
I did everything I could .But it was all for nothing !!!
Below are the steps found online .
If your DVR is failing to record during scheduled times, the issue is often related to misconfigured schedule grids, hard drive health, or incorrect recording modes.
Based on your equipment, such as the Dahua DH-XVR5104HS-I3 or Hikvision DS-7608NI-M2/8P, you can follow these troubleshooting steps to resolve the issue.
1. Verify the Recording Schedule Grid
The most common cause is a wiped or unconfigured schedule, which can happen after firmware updates.
My DVR dose not work on schedule record mode !!!
I did everything I could .But it was all for nothing !!!
Below are the steps found online .
If your DVR is failing to record during scheduled times, the issue is often related to misconfigured schedule grids, hard drive health, or incorrect recording modes.
Based on your equipment, such as the Dahua DH-XVR5104HS-I3 or Hikvision DS-7608NI-M2/8P, you can follow these troubleshooting steps to resolve the issue.
1. Verify the Recording Schedule Grid
The most common cause is a wiped or unconfigured schedule, which can happen after firmware updates.
- For Dahua Devices: Navigate to Main Menu > Storage > Schedule.
- For Hikvision Devices: Navigate to Main Menu > Record > Schedule.
- Check the Grid: Ensure that 24 hours for all 7 days are highlighted for the desired recording type. Typically, Green represents Regular/Continuous recording, and Yellow represents Motion Detection. If the grid is empty, no recording will occur
- .2. Check Hard Drive (HDD) Health
