hik vision

Hello, I have the Hikvision iVMS-4200I have a doubt. Please, how do I delay using the fingerprint? I'll try to explain if you don't understand my question After using any fingerprint, I want to block the access for period maybe 1 minute or 10 minutes, that is to avoid to a person to give...

Hi, I noticed the front camera video intermittently freezes for a few seconds and will then catch up. Sometimes it will also show random blocky colours too but I generally only see this through the app on my phone. Anyone seen this before? As it doesn't seem to happen to the Rear camera I...

I would like to check The NVR (DS-9632NI-I16) footage will affect because of firmware upgrade ? Firmware_V4.60.005_220108

I work as a programmer/IT support at a medium size retail company, we 35 stores and each store has 1 dvr and 6 cameras connected to the dvr. So 35 dvrs and 210 cameras total. So far the cameras have been used merely as a security deterence and recording just in case any cases appear and we need...

Hi, I bought my HikVision system from use-ip about 1 year ago and it generally works ok, however I have a few niggles which suggest it’s not quite set up correctly. I set up via ‘plug and play’ and I use the NVR as a virtual host for the cameras. My issues are as follows: - Every few months...

I updated a few ANPR cameras model DS-2CD7A26G0/P-IZS (H3 firmware) to V5.6.11 200609 from here. All cameras took the firmware fine except one camera now is seemingly boot-looping ever since the attempted update. I can see it come and go on the network, a couple of times I have even got a web...

Hi, I have line crossing detection setup on my driveway and only want it to alert me in a certain direction from A->B as you can see in my picture. I am however getting notifications when someone crosses from B->A. I have this smart even setup on my NVR which is DS-7608NI-I2 / 8P and running...

Hi, I have configured for the day time settings and wondering if its possible to remove the (W)/(S)? beside the text. Please see picture and thank you

I have lots of DS-2CD2185FWD-I (G1 firmware) cameras and I upgraded one to the latest firmware 5.6.6 from here Now the camera web interface is REALLY slow compared to all the other same cameras on 5.6.5, for example: 5.6.5 from login to live-view = 10s 5.6.6 from login to live-view = 20s 5.6.5...

Hi All, Just bought a pair of the colorvu mini PTs and a DS7608 NVR. I don't suppose anyone else has this combination setup anywhere? I just can't get the two to work with the NVR it just gets stuck at connecting. I've tested on a spare 4 channel 7604 which works fine, I've tried everything I...

Hi, I have an Icon appearing above my nvr and alarm system and I dont know what it means.

Hi, I have the opportunity to modify the setup of my NVR. It's a DS7608-NXI-I2/8P/4S. I found that pretty much every box was ticked for Events: motion, region, line crossing etc. But I'm presuming that's largely redundant and it certainly triggers a lot of false events. Is there a reference...

Hi guys, I'm new here and looking for some help with my line cross detection. I recently noticed the line crossing detection does not appear to be working. It used to work and no changes (configuration or otherwise) have been made, however, it has stopped alerting. I have attached some...

Hello team, i wondering if anyone can help me : my Hik Connect app is showing all cameras as failes to start playing. Had no issues since installation over 6 months ago up to this point. Hasn’t worked since last week. Any ideas ? the DVR is connected to my LAN, i can ping to it and it got a...

Hi Guys. Hoping someone can help. I have mainly Annke C800 POE 4K cameras and i have always been able to use the Hik Vision firmware on them using the IPC_G1_EN_STD_5.6.5_200316 firmware. I have since purchased an Annke H800 camera POE 4K but i am a little unsure which Hik Vision firmware...

I have created video tutorials could please let me know any miz takes

Hi I have a Hikvision DS-7608NI-K2/8P 8 Channel NVR, bought in 2016, which the power supply recently failed on. I have replaced the power supply with the same make and model which is working correctly. Now when I boot up the NVR it does not show up on the network and the SADP tool does not find...